Operating And Display Elements - Dometic COOLFREEZE CFX-WD Instrucciones De Uso

CFX-WD
Please read this instruction manual carefully before first use, and store it in a safe place.
If you pass on the product to another person, hand over this instruction manual along
with it.
The wireless display CFX-WD allows data, such as the current temperature, power supply or alarm,
to be shown up to 15 m away from the CFX cooler.
1

Operating and display elements

Description
P
a
°C/°F button
SET button
+/– buttons
2 Operating the wireless display
2.1 Selecting the temperature unit
• Press the "°C/°F" button to switch between °C and °F.
2.2 Showing the current temperature/power supply
The display indicates the current temperature of the cooler. When the cooler is connected to a
100 – 240 V AC mains supply, the display shows "AC". When the cooler is operated with 12/24 V
DC, the display shows the input voltage and the mode set for the battery monitor (V
V – MEDIUM, V – LOW).
M L
2.3 Showing the set temperature
• Press the "SET" button once.
The display indicates the set cooling temperature.
EN
LED lights up green:
LED lights up orange:
LED flashes red:
Switches between °C and °F
– Show set cooling temperature (SET)
– Set temperature alarm (ALERT)
– Switch wireless display on/off (ON/OFF)
– The +/– buttons set the temperature alarm.
– The – button switches the backlight on and off.
– The + button turns on/off the alarm sound.
Operating and display elements
Explanation
Compressor is on
Compressor is off
Device is switched on but not ready for
operation
– HIGH,
H
3