Connection; Connecting The Dos Modules; Dos G 80 With Hose Adapter; Dos G 80 Profiline With Hose Adapter And Dispenser Connection - Miele professional DOS G 80 Instrucciones De Montaje

DOS G 80 with
hose adapter
DOS G 80
ProfiLine with
hose adapter and
dispenser con‐
nection

Connecting the DOS modules

All DOS modules and accessories supplied with them must be fit‐
ted by Miele Service or by a Miele authorised service technician.
The DOS G 80 module can be connected as standard to the washer-
disinfectors and commercial dishwasher listed under "Areas of appli‐
cation for DOS modules".
The following accessories, which are supplied with the relevant DOS
module, must be used for connection to commercial dishwashers
marked with an asterisk *
The hose adapter, for connecting to larger diameter dispenser con‐
nections, is supplied with DOS module G 80 and must be used with
commercial dishwashers G 8066 and PG 8067.
Using the adapter, the diameter of the dispensing hose is increased
to match the diameter of the connection.
The dispenser connection and the hose adapter are supplied with the
G 80 DOS ProfiLine module and must be used with commercial dish‐
washers PG 8080, PG 8081i, PG 8082 SCi and PG 8083 SCVI.
Remove the blind stoppers and fit the dispenser connection.

The dispenser connection may be hidden behind the back panel of
the machine.
en - Connection
39