Environmental Protection; Technical Specifications - Metabo AS 18 L PC Instrucciones De Uso

The machine has shut down by itself:
Causes and remedies:
• Battery pack almost flat: (the electronics
prevent the battery pack form discharging totally
and avoid damage). If one LED is flashing, the
battery pack (12) is almost flat. If necessary,
press the button (13) and check the LEDs (12) to
see the charge level. If the battery pack is almost
flat, it must be recharged.
• Battery pack is not inserted properly: Check and
correct.
• Long continuous overloading of the machine will
activate the temperature cut-out.
Leave the machine or battery pack to cool.
Note: if the suction hose is not removed from the
housing prior to switching on the device, this will
lead to overheating of the device.
Note: if the battery pack feels very warm, the
pack will cool more quickly in an "AIR COOLED"
charger.
Do not interfere with the device. Contact
an authorized workshop or Metabo's after-
sales service department (see chapter 12. on
Repairs).
f
11. Accessories
Only use original Metabo battery packs and Metabo
accessories.
Use only accessories that fulfil the requirements
and specifications listed in these operating
instructions.
If you need any accessories, check with your
dealer.
A Chargers: ASC 30-36 V, ASC 15, ASC 30, etc.
B Battery packs with different capacities.
Purchase only battery packs with the voltage
matching your device: 5.2 Ah (6.25592);
4.0 Ah (6.25591); 3.0 Ah (6.25594); etc.
C Suction hose (6.30171)
D Nozzles: suction nozzle (6.30320); crevice
nozzle (60.30323)
E Flat pleated filter (HEPA) (6.30175)
F Fleece filter bag (6.30173)
G Dolly (6.30174)
See www.metabo.com or the catalogue for a
complete range of accessories.
12. Repairs
Repairs to devices must be carried out by qualified
electricians only!
Use only original Metabo spare parts.
Contact your local Metabo representative if you
have Metabo power tools requiring repairs. See
www.metabo.com for addresses.
You can download a list of spare parts from
www.metabo.com.

13. Environmental Protection

Do not allow battery packs to come into contact with
water!
Protect the environment, and do not dispose of
power tools and battery packs with household
waste. Observe national regulations on separated
collection and recycling of disused machines,
packaging and accessories.
Discharge the battery pack in the power tool before
disposal. Prevent the contacts from short-circuiting
(e.g. by protecting them with adhesive tape).

14. Technical Specifications

Explanatory notes on the specifications on page 2.
Changes due to technological progress reserved.
Lxwxh=External dimensions
U = Mains voltage
S = Suction hose diameter
Ø
S = Suction hose length
L
p = max. vacuum (at the hose)
U1
p = max. vacuum (at the blower)
U2
A = Filter area
V = Air flow rate (at the hose)
l/min1
V = Air flow rate (at the blower)
l/min2
V = max. container volume
Typical A-effective perceived sound levels:
L = Sound pressure level
pA
L = Acoustic power level
WA
K , K = Uncertainty
pa WA
During operation the noise level can exceed 80
dB(A).
Wear ear protectors!
The technical specifications quoted are subject to
tolerances (in compliance with the relevant valid
standards).
ENGLISH en
9