Selecting The Temperature Unit; Cleaning - Beurer LE 40 Instrucciones De Uso

6.9 Selecting the temperature unit

The air dehumidifier can display the temperature in either degrees Celsius (°C) or degrees Fahrenheit (°F).
• To switch between the temperature units, press and hold both the TIMER button and the SETTING button
for 3 seconds.

7. Cleaning

WARNING
Before cleaning, always ensure that the mains plug of the air dehumidifier has been properly discon-
nected.
Regular cleaning is a prerequisite for hygienic and fault-free operation. Always empty and thoroughly clean
the water tank of the air dehumidifier if the device has not been used for more than 3 days. A lack of cleaning
and hygiene can cause bacteria, algae and fungi to form in the water.
Cleaning the housing
• Clean the air dehumidifier with a damp cloth (water or a mild cleaning solution). When cleaning, do not
use any solvents or other aggressive or abrasive cleaning agents as the surface could become damaged.
Cleaning the water tank
1. Carefully pull the water tank out backwards as shown.
2. Rinse out the water tank with clean water every 2 weeks. With very
intensive use, the water tank should be cleaned at even shorter
intervals. If necessary, remove any deposits in the water tank using
a plastic brush.
Cleaning the filter
1. First remove the plastic cover on the rear of the air dehumidifier.
2. Now carefully remove the filter as shown in the image.
3. Clean the filter with a vacuum cleaner or rinse it under clean water.
Then allow the filter to dry out. Do not replace the filter until it is
completely dry.
21