EGO BC3800E Manual De Uso página 18

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 45
EN
PROBLEM
Trimmer head will not
advance line (only
using with trimmer
head).
WARRANTY
EGO WARRANTY POLICY
Please visit the website egopowerplus.com for full terms and conditions of the EGO Warranty policy.
18
56 VOLT LITHIUM-ION REAR MOTOR BIKE-HANDLE BRUCHCUTTER — BC3800E
CAUSE SOLUTION
The motor shaft or trimmer head is bound
with grass.
There is not enough line on the spool.
The trimmer head is dirty.
Line is tangled on spool.
The line is too short.
SOLUTION
Stop the machine, remove the
battery and remove the grass from
the motor shaft and trimmer head.
Remove the battery and replace the
cutting line, follow the section "LINE
REPLACEMENT" in this manual.
Remove the battery and clean the
spool, spool retainer and spool base.
Remove the battery, remove the line
from the spool and rewind, follow
the section "LINE REPLACEMENT" in
this manual.
Remove the battery and pull the
lines while alternately pressing
down on and releasing the bumb
knob.

Publicidad

Tabla de contenido
loading

Tabla de contenido