Steren CCTV-968 Manual De Instrucciones página 42

4. CONNECTIONS
1. Place the cameras (not included) where you need surveillance.
2. Connect the cameras to the DVR.
3 Insert the RS485 PTZ camera cables to the corresponding inputs of each pole: purple,
positive; Grey, negative. (Press the orange latch with a screwdriver to insert the cables).
4. Attach sensors or turrets in the corresponding inputs. (call a technician for proper
installing).
5. Connect the DVR to a monitor using a video cable with BNC connector or VGA cable.
6. Connect the network cable to NET input, the power adapter in the input marked as DC 12
V & the mouse into an USB port on the DVR.
11 11