Steren CCTV-968 Manual De Instrucciones página 50

8. MENU
-Video: picture settings.
-Channel-select the channel to which apply the changes.
-Name-assigns a name to the selected channel. Click on the box so a different alphanumeric
keyboard appear.
-Show Name-shows or hides the name of the channel in the screen. Pressing "Position"
displays a grid in which you can specify its location.
-Show Time-shows or hides the date and time on the screen. Pressing "Position" displays a
grid in which you can specify its location.
-Brightness, Contrast, Hue and Saturation.-use the horizontal bar to modify the image
parameters. To return to the factory settings, press "Default", located at the bottom.
-Blind-It can block up to 4 specific areas of the field of recording. Select the checkbox and
press "Área":
-Click with the right mouse button to return to the previous menu and press "Ok" to save
your changes.
-By default, the entire area of the camera is clear
(transparent tiles). To block any zone, click on any tile
and drag the mouse to form a square of size you want.
The yellow box indicates the center of the recording area.
-To remove the blocked areas press "MENU" on the DVR
front panel or remote control.
19 19