Steren CCTV-968 Manual De Instrucciones página 51

-Alarmin.- external alarms configuration (such as smoke or motion sensors).
-Input-selects the channel to which applies the changes. (The DVR has 4 input channels,
located on the back. See p. 6).
-Type.-Select the voltage response rating, depending on the connected sensor.
-Rec. CH.-Select the channels that recorded after the alarm is activated.
-Alarmout.-activates or deactivates the alarm output, such as a turret or siren alarm.
-E-alarm-enables or disables the sending of an email after the alarm is activated.
If you want to set the same settings to one or all channels, use the tab on the bottom and
press 'Copy to'. At the end select "Ok" to save your changes.
20 20
-Detect-enables or disables the selected
alarm channel.
-PTZ-links alarm with a PTZ camera. (To
adjust the camera, see p. 21).
-Duration-determines the recording time
after the alarm is activated.
-Buzzer-activates or deactivates the DVR
alarm.
8. MENU