Warning Labels On The Machine; Important; Symbols On The Machine; Emission Control - RedMax BCZ250S Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

BCZ250S/BCZ260S/BCZ260TS

3. Warning labels on the machine

(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)

4. Symbols on the machine

For safe operation and maintenance, symbols
are carved in relief on the machine. According
to these indications, please be careful not to
take a mistake.
(a) The port to refuel the "MIX GASOLINE"
Position: FUEL TANK CAP
(b) The direction to close the choke
Position: AIR CLEANER COVER
(c) The direction to open the choke
Position: AIR CLEANER COVER
(d),(e) Only use non-metallic, flexible cutting
attachments, i.e. trimmer heads with trimmer
cord.
Position:
(d) CUTTING ATTACHMENT GUARD
(e) SHAFT TUBE
US-4
Symbols
(1) WARNING! Grass Trimmer can be
dangerous! Careless or incorrect use can
result in serious or fatal injury to the
operator or others. It is extremely important
that you read and understand the contents
of the operator's manual.
(2) Please read the operator's manual carefully
and make sure you understand the
instructions before using the machine.
(3) Max. speed of output shaft, rpm
(4) Always wear:
• A protective helmet where there is a risk
of falling objects
• Approved hearing protection
• Approved eye protection
(5) Always wear approved protective gloves.
(6) Wear sturdy, non-slip boots.
(7) Watch out for thrown objects and
ricochets.
(8) The operator of the machine must ensure,
while working, that no persons or animals
come closer than 15 meters.
(9) Arrows which show limits for handle
positioning.

IMPORTANT

If warning label peel off or become soiled and
impossible to read, you should contact the dealer
from which you purchased the product to order new
labels and affix them in the required location(s).
WARNING
Never modify your grass trimmer.
We won't warrant the machine, if you use the
remodeled grass trimmer or you don't observe
the proper usage written in the manual.

■ EMISSION CONTROL

An emission control label is located on the engine.
*1: The year will be changed every year of manufacturing.
*2: The first letter of the family name will be changed every year of
manufacturing.
*3: SP : Sealed tank made of HDPE or PE.
2014
25
54GB

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Bcz260sBcz260ts

Tabla de contenido