Installation
WARNING
The unit is subject to dangerous voltage and must not be installed directly adjacent
to the water. Otherwise there is a risk of severe injuries or death by electrocution.
Install the unit at a distance of at least 2 m from the water to ensure that it is pro-
tected against flooding.
Attach WLAN antenna
Connection
Connecting an EGC-compatible device
NOTE
The unit will be damaged, if water enters the plug connectors.
Screw the plug connectors to each other (socket/connector) so that they are water-
tight. Cover open plug connectors with a protection cap and rubber seal.
Ensure that the rubber seal is clean and fits exactly. Replace the rubber seal if it is
damaged.
22
Use a ground stake for installation
FMR0028
FMR0003
FMR0027