Schneider Airsystems PNG-PN 25 Manual De Instrucciones página 7

Table of contents - Part 1
1.1 General information ..................
1.2 Scope of delivery......................
1.3 Conventional use ......................
1.4 Technical data ..........................
1.5 Components ............................
1.6 Commissioning.........................
1.7 EC Declaration of Conformity .....
The specified illustrations appear at the be-
ginning of the Operating Instructions.
1.1 General information
Observe the safety instructions!
Read the Instruction Manual!
Note: Read and memorise part 2 of the
instruction manual!
1.4 Technical data
Max. permissible pressure
Air consumption
Working pressure (flow pressure)
Compatible pin nails (length)
Nail type
Nail stem thickness
Magazine capacity
Pulse sound pressure level L
as per DIN 45 635, part 66
Pulse sound power level L
as per DIN 45 635, part 66
Vibration (under load) as per DIN EN 28 662, Part1
Contact trigger
Insertion depth adjustment
Overall dimensions: width x depth x height
Recommended hose diameter (inner) at L= 10 m
Weight
1.5 Components
01 Plug nipple
02 Trigger lever
03 Catch lever
04 Magazine
05 Magazine slide
07 Guide plate
3
3
3
3
3
3
4
(at distance of 1 m)
pa 1m
wa
Subject to technical modifications. Illustra-
tions may deviate from the original.
1.2 Scope of delivery
– Pin nailer
– Allen wrench
– Tool oil
– Systainer
– Instruction manual
1.3 Conventional use
The compressed air tool is an industrial tool
suitable for:
Invisible nailing of decorative strips, window
beads and pearl strips, ornamentation and
picture frames.
Any other type of use is considered contrary
to the intended use.
226 x 42,5 x 160 mm
11 Exhaust air guide
14 Pin pusher guide
1.6 Commissioning
Note: Read and memorise part 2 of the
instruction manual!
Caution: Depressurise the unit!
GB
PNG-PN 25
7 bar
0,34 l/impact
4 - 7 bar
15 - 25 mm
PN
0,64 mm
102 Piece
77 dB(A)
90 dB(A)
2
1,3 m/s
No
No
9 mm
0,95 kg
I/ 3