Uploading From A Usb Drive - Ovention Matchbox Serie Manual De Instalación Y Operación

English

Uploading from a USB Drive

Use the following procedure to upload pre-programmed menu
items or firmware updates from an external USB drive. This
procedure requires access to password-protected screens and
should be performed at oven startup by authorized personnel
only.
1. move the Standby switch up to the "On" position.
• The touchscreens will energize. One touchscreen
shows the available setpoint temperatures. The other
touchscreen shows the name of the oven and current
software version.
2. Remove the cover from the USB port above the Standby
switch, and insert the USB drive into the port.
3. Touch the upper left-hand corner on the right touchscreen.
• a password keypad will appear on the touchscreen.
LEFT TOUCHSCREEN
Touch here to access password keypad
followed by the Settings screen.
Startup Screens
4. Input the password using the keypad, and touch ENTER.
• The Settings screen will appear on the left touchscreen.
USB Interface screen.
Settings Screen
5. Touch the USB icon to access the USB Interface screen.
Form No. OVmm-1013
RIGHT TOUCHSCREEN
Touch to access
Touch to return to
Home screen.
6. Touch the desired function to begin the corresponding
upload.
• Select the upload file from the list that appears.
• a screen will appear to indicate that the upload is in
progress.
• When the upload is complete, the oven will restart.
RB:
Y.YY
Update Update
Relay Display
Firmware Firmware
Touch to upload
relay firmware
update.
USB Interface Screen
7. When the startup screens reappear, remove the USB drive
from the USB port, and replace the port cover.
8. Perform the normal "Startup" procedure at the beginning of
this section to use the oven.
13
OPERATION
UI:
Read Read
Logs Recipes
X.XX
Load
Back
Config
File
Touch to upload
pre-programmed
menu items.
Touch to upload touchscreen
firmware update.