TFA Dostmann 60.2015 Instrucciones De Uso página 8

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 25
TFA_No. 60.2015_Anleitung
Alarm clock with indoor climate
• Weather symbols (based on indoor temperature and
humidity)
4. For your safety
• This product is exclusively intended for the field of
application described above. It should only be used as
described within these instructions.
• Unauthorized repairs, modifications or changes to the
product are prohibited.
• This product is not be used for medical purpose or for
public information, it is only intended for home use.
Caution!
Risk of injury:
• Keep this instrument and the batteries out of the reach
of children.
• Batteries must not be thrown into a fire, short-circuited,
taken apart or recharged. Risk of explosion!
• Batteries contain harmful acids. Low batteries should be
changed as soon as possible to prevent damage caused
by leaking.
• Never use a combination of old and new batteries
together, nor batteries of different types.
• Wear chemical-resistant protective gloves and safety
glasses when handling leaking batteries.
Important information on product safety!
• Do not place your product near extreme temperatures,
vibrations or shocks.
• Protect it from moisture.
14
29.07.2013
14:09 Uhr
Seite 8
Alarm clock with indoor climate
5. Elements
A: Display (Fig. 1):
A 1: Time/date/alarm time
A 2: Weather symbol
A 3: Alarm symbol
A 4: Day of the week
A 5: Comfort level
A 6: Humidity
A 7: Temperature
B: Buttons (Fig. 2):
B 1: MODE button
B 2: UP button
B 3: DOWN button
B 4: MAX/MIN button
B 5: LIGHT/SNZ button (on the top)
C: Housing (Fig. 2):
C 1: Battery compartment
6. Getting started
• Open the battery compartment and insert three new
batteries 1,5 V AAA. Ensure that the battery polarities
are correct.
• The device will alert you with a beep and all LCD seg-
ments will be displayed for a short moment.
6.1 Note:
• For better adjustment of the device, press the LIGHT/
SNZ button to turn on the backlight for 8 seconds.
• As soon as the backlight turns off, first press the LIGHT/
SNZ button and then the setting button.
15

Publicidad

Tabla de contenido
loading

Tabla de contenido