Local Time Setting; Timer Setting; Parental Lock; Favorite - Fuba ODE8510 T2 STEALTH Manual Del Usuario

WARNING
If the screen is connected via HDMI display problems, connect the receiver via SCART to set a compatible resolution
value.
Aspect mode
2. : aspect ratio of the screen/TV connected to the receiver, eiter
different format from the screen will be displayed:
16:9 Full
a. : For 16:9 screens. The images transmitted in 4:3 will be adapted to the whole screen.
b. 16:9 PillarBox: For
image broadcasted in 4:3 to fill the screen without distorting the original image.
4:3 LetterBox
c. : For 4:3 screens. The receiver will apply two black bars above and below images transmitted
in 16:9 to fill the screen without distorting the original image.
4:3 Pan&Scan
d. : For 4:3 screens. Images transmitted in 16:9 is adjusted in proportion to the height of the
screen by cutting off the side portions.

3.4.3 Local Time Setting

Adjusting the time on the receiver's clock. The following controls are offered:
Country
1. : select the country in which the receiver is installed to automatically synchronize the time (recommended)
in accordance with the information transmitted by terrestrial digital channels.
GMT offset
2. : manually adjust the time offset relative to the global benchmark of Greenwich (Greenwich Mean Time-
GMT).
NOTE
Date and time are automatically synchronized on the receiver by means of the information transmitted by the channel
being viewed.

3.4.4 Timer setting

Programming and/or registration viewing timer menu. Refer to paragraph 2.7 Timer.

3.4.5 Parental Lock

The Parental Lock menu allows you to control access to channels after entering the four-digit numeric password
defined by the user, also called Personal Identification Number (PIN).
NOTES AND WARNINGS

This menu is always protected with PIN.

The PIN code is originally defined by the user at the first installation of the device (see section 1.4).

If you have forgotten your password, you will need to return the receiver to its original state of its first installation
from the menu Factory Setting (see section 3.5.2).
Turn on this menu to change or disable the parental control level. It performs a check on the vision of various sensitive
events. When the channel you are tuned in to transmits an event with security information for a viewing public at or
above an age level defined by the
see, on the screen, a request to unblock viewing of the channel by entering the PIN code.
This menu also allows you to change your password. To do so, first enter the PIN you chose in the field
using the number buttons on the remote control, then reinsert it in

3.4.6 Favorite

Menu to rename favorite channel groups (see also paragraph 3.2.1).

3.4.7 Audio Description Setting

The Audio Description (AD) gives to visually impaired users accessibility to video contents, through a narration of the
video scene in addition to the main audio of the program. This kind of service is achievable in two different ways. In the
first one, so called "broadcaster-mixed" mode, the broadcaster transmits a unique audio track which contains both
audios, the main one and the video description: in this case, user has to simply select the involved audio track with
AUDIO key of remote control. Instead, in the second way, so called "receiver-mixed" mode, the audio description is
transmitted as a single additional track, like the main audio: in this case, the mix of the two audio tracks is demanded to
receiver device. To do so, the user has to activate the
Setting and eventually regulates the
the main audio.
16:9 screens. The receiver will apply two black bars to the left and right sides of an
Rating Lock value set in the menu, the receiver will block the channel. You will then
AD Service
AD Volume Offset
which represents the level between the video description and
16:9 4:3
or , and how the images with a
Confirm Password
to confirm it.
in the menu System Setup > Audio Description
ODE8510 T2 STEALTH
New Password
11