Operating - Medisana HKS Instrucciones De Manejo

GB
1 Safety Information / 2 Operating
1.2
Health tips and
recommendations
2.1
Operation
2.2
HKS Heat Pad
2.3
HKF, HKC, HKN
Heat Pad
6 6
• Should you have any concerns about health issues, consult your doctor be-
fore using the heat pad.
• Do not use the heat pad on parts of the body that are swollen, injured or
inflamed.
• Should you experience persistent pains in the muscles and joints, please
inform your doctor. Persistent pains can be a symptom of serious illness.
• If you experience any pain or discomfort while using the unit, stop using it
immediately.
You can use the MEDISANA HKS / HKF / HKC / HKM / HKN heat pads to gently
warm and relax various parts of the body. Using the heat pad stimulates blood
circulation in hardened muscles and helps you to relax after a strenuous day.
The heat pad features an electric temperature control that regulates the
temperature according to the chosen setting. With the hook and loop strap
supplied with the pad you can position and fit the pad to the desired part of
the body.
Only use the heat pad in the cover supplied with it.
Plug the unit into the mains outlet and move the slider control from position 0
to position 1. The power LED will light up in red. After a few minutes you will
be able to feel the pad getting noticeably warmer. If you require a higher
temperature setting, move the switch to the next positions, 2 or 3, or to the
maximum heat setting, position 4. If the pad gets too hot for you, move the
slider back to position 3, 2 or 1.
After a short time, the pad will cool down noticeably.
To switch the unit off, move the switch back to position 0. The red power LED
will go out, indicating that the unit is switched off. Unplug the unit from the
mains outlet.
The heat pad will switch off automatically after approx. 90 minutes of
continuous use. To switch it back on again, move the slider control to position
0 and then back to the desired heat setting.
Unplug the unit from the mains outlet once you have finished using it.
Plug the unit into the mains outlet. The red LED indicates that the heat pad is
connected to the mains supply. Now press the ●-button and switch the unit
on. The first segment of the LED display for the lowest temperature setting will
light up in red. By pressing the ▲-button you can select the higher tempera-
ture settings, 2 to 6. The selected temperature setting is indicated by the num-
ber of lit segments. When setting 6 is selected, press the ▲-button once more
and the heat pad will return to temperature setting 1.
You can switch the heat pad off using the ●-button. If you switch it on again,
the previously selected temperature setting will still be stored, so long as the
unit remains plugged into the mains outlet.
The heat pad will switch off automatically after approx. 90 minutes of con-
tinuous use. To switch it back on again, press the ●-button.
Unplug the unit from the mains outlet once you have finished using it.