JB Systems MX 100 Manual De Instrucciones página 3

1. Mic Input Gain: Adjusts microphone input level.
2. Treble and Bass EQ: Adjusts the high and low frequency
levels of the input channels for a good sound.
3. Input Fader: Controls individual source levels (channels) in
the mix.
4. Replaceable Crossfader: Achieves clean segues between
the two input channels. "Hard left" selects Channel 1. "Hard
right" selects Channel 2. With the crossfader centered, both
assigned channels are live. Use the crossfader for fast and
seamless segues (fades) frome one selected channel to the
other. Note: The crossfader is user replaceable in case of
failure. Simply unscrew the two large screws which hold it in
place, lift it out and disconnect the cable. Re-attach the new
crossfader and screw the mounting plate back on the unit.
5. Mic Input: Insert your microphone here with 1/4" plug.
6. Headphone Input: Insert your headphones here with 1/4"
plug.
7. Input Toggle Switch: Selects which source will be active
based on what you have connected to the rear panel input
section (phono/line).
8. Channel Cue / Cue Pan: Used to preview channel audio to
your headphones. Listen here before moving up channel
faders or moving the crossfader.
9. Headphone Level: Adjusts cue volume.
10. Master Fader: Controlls the overall output level.
11. Channel Gain: Adjusts the pre-fader volume for cleaner
sound.
3 MX 100