JB Systems MX 100 Manual De Instrucciones página 4

12. Power Switch: Turns the unit ON and OFF.
13. Power Connector: Plug in power adapter here and check
the voltage level to match your country's standard.
14. Fader Start: This function works in conjunction with a
Compatible fader start CD player.
When used with a compatible CD player, you can use the
crossfader to start and stop the CD player with the slide of
the fader. The fader start switch activates the fader start
feature. When in ON position, the fader start allows the fader
to return automatically to preset digital Cue Points on your
compatible CD player.
15. Stereo Main Outputs: Unbalanced RCA connectors
controlled by the master fader.
16. Line Inputs: Unbalanced RCA jacks for connecting stereo
audio from line level sources such as CD players, Hi-fi VCR's,
cassette and reel-to-reel tape decks, DAT machines, laser
discs, tuners, even synthesizers or other mixing consoles.
17. Phono Inputs: Plug your turntables in here. When these
connectors are used, your signal is fed directly to the high
quality RIAA phono pre-amplifiers. Use this position only for
turntables. Line level sources will overload the sensitive
phono pre-amps and will cause distortion.
MX 100 4