XS Instruments 8+Serie Manual De Instrucciones página 33

P6.2 User ID: name of the user; max 8 characters, appears in the print header Complete and GLP and
•
on display along with the padlock: open
menus, close if password is entered so the user has access restrictions to the menus.
• P6.3 Company name: max 15 characters, appears only in the print header Complete and GLP.
P6.4 pH Sensor ID: name of the pH sensor; max 8 characters, appears in the print header Complete and
•
GLP and to display alongside the electrode calibration status .
• P6.5 Cond Sensor ID: name of the Cond sensor; max 8 characters, appears in the print header Complete
and GLP and to display alongside the cell .
P6.6 Password
Enter this setup menu to insert, modify or disable the password.
• The activated password is indicated in the Complete display with the icon
(Password none) icon will appear.
The user must provide the password to calibrate the device, clear the saved data in data logger mode
•
and and change date and time of the device.
Note: In case of lost password, please contact Technical Assistance in order to unlock the instrument via
Master Password which will be provided at the time.
For 8+ Series:
• 4-numeric characters password to enter with
To disable the password, enter as a new password "0 0 0 0".
•
For 80+ Series:
• 4 alphanumeric characters password to enter exclusively with external keyboard.
To disable the password, press "ENTER" as a new password with external keyboard.
•
P6.7 Display information (
Enter this setup menu to select how many information to be shown on the display in measurement mode.
Simple -default- The display only shows the measured value, the unit of measure, the temperature,
•
stability criteria and cell costant.
• Complete On the display in measurement mode in addition to the default information, the various IDs
and their icons are displayed (P6.1 / P6.2 / P6.4 / P6.5).
P6.8 Reading with HOLD
Enter this setup menu to enable or disable the HOLD stability criterion.
NO -default- the measure is not fixed.
•
YES: with this enabled option, the measurement is locked as soon as it reaches stability. The freezed
•
value is indicated by the icon
To unlock and resume the measurement until the next stability press
P6.9 Date format
Enter this setup menu to modify the date format.
dd/mm/yyyy -default-
•
mm/dd/yyyy
•
• yyyy/mm/dd
P6.10 / P6.11 Date and Time Setting
Enter this setup menu to update device date and time.
P6.12 Temperature unit option
Enter this setup menu to select which temperature measurement unit to use.
• °C -default-
°F
•
UM Serie 880 EN rev.2 30.07.2020
if no password is entered so the user can access all the
function available only for 80+ Series
.
32
. If there are no limitations
and keys, press to move to the next number.
)
.
EN