Cleaning And Maintenance - Beper 40.956 Manual De Instrucciones

Hair Kit Use instructions
STRAIGHTENER
TO STRAIGHTEN YOUR HAIR
• Separate your hair into sections. Clip the upper sections to the top of your head so that you can
work with the sections underneath.
• Take up a section about 2 to 3cm wide and place it between the 2 heating plates, near the roots
of your hair.
• Press the straightener handles, hold firmly to keep the section and slide the unit slowly down the
section from roots to tips.
• Take up a new section and continue in this way until all your hair is straightened.
• Repeat if necessary, then release the straighteners.
• Complete the style with a finishing touch. You may wish to set the straightening using a light misting
of hairspray.
HAIR DRYER
Fully unwind the cable
With the air speed selector, you can set the power of the airflow as needed.
Settings.
0: turned off
1: medium airflow, for a delicate drying of the fine and slightly wet hair.
2: stronger airflow, for a faster drying
With temperature selector it is possible to set the airflow temperature.
1: low temperature
2: medium temperature
3: high temperature
Cold air button
Allow to fix the hairstyle without desiccating hair. Pressing this button, the cold airflow button will
stop.
CONCENTRATOR
With the concentrator, the airflow works on accurate areas, to get easily the desired hai rstyle.
This accessories allow to concentrate directly the airflow on the locks, for an easy hai rstyle. Put the
concentrator on the hair.

CLEANING AND MAINTENANCE

• Unplug the unit and allow it to cool completely.
• Clean the plates using a soft, damp cloth, without detergent, to preserve the optimal quality of the
units. Do not scratch the plates
8