Displaying Stored Results - Profi Care PC-BMG 3019 Manual De Instrucciones

e. After measurement, the monitor will turn off automatically after 1 minute of
no operation. You can also press the "START" button to turn off the monitor
manually.
f. During measurement, you can press the "START" button to turn off the
monitor manually.
Note:
Please consult a health care professional for interpretation of pressure measure-
ments.

7. Displaying Stored Results

a. After the measuring, you can review the measurements in the current mem-
ory bank by pressing the button "MEM". Now the LCD displays the amount of
the results in the current bank. See Fig. 7-1.
Fig. 7-1
b. You can also press the "MEM" button in Clock Mode to display the stored
results. The current memory bank will flash and the amount of results in this
bank will be displayed. See Fig. 7-2 Press the "START" button to change to
the other bank. See Fig. 7-3.
Confirm your selection by pressing the "MEM" button. The current bank will
also be confirmed automatically after 5 seconds with no operation.
c. After selecting the memory bank, the LCD will display the average value of
the last three results in this bank. See Fig. 7-4 & 7-5. If no results are stored,
the LCD will show dashes as shown in Fig. 7-6.
Fig. 7-4
PC-BMG3019_IM
Fig. 7-2
Fig. 7-5
Fig. 7-3
Fig. 7-6
111
18.05.18