Displaying Stored Results - Profi Care PC-BMG 3018 Manual De Instrucciones

c. After selecting the memory bank, the monitor starts to seek
zero pressure. See Fig. 6- 4.
d. The monitor inflates the cuff until sufficient pressure has built
up for a measurement. Then the monitor slowly releases air
from the cuff and carries out the measurement. Finally the
blood pressure and pulse rate will be calculated and displayed
on the LCD screen separately. Irregular heartbeat symbol (if
any) will blink. See Fig. 6-5 & 6-6. The result will be automati-
cally stored in the current memory bank.
Fig. 6- 4
e. After measurement, the monitor will turn off automatically after
1 minute of no operation. You can also press the "START"
button to turn off the monitor manually.
f. During measurement, you can press the "START" button to
turn off the monitor manually.
Note:
Please consult a health care professional for interpretation of
pressure measurements.

7. Displaying Stored Results

a. After the measuring, you can review the measurements in the
current memory bank by pressing the button "MEM". Now the
158
PC-BMG 3018_IM_new
Fig. 6-5 Fig. 6-6
08.07.19