Technical Data - Trotec BC 20 Manual De Instrucciones

Technical data

Battery . . . . . . . . . . . . . . . 1 x 9V battery (006P, MN1604)
Auto power-off . . . . . . . . . . . . . . . . . . . approx. 15 Minutes
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.5-digit LCD
Resolution . . . . . . . . . . . . . . . . . . . . . 0.1 % R.H., 0.1 °C/°F
Measuring range, humidity . . 0-100 % R.H. (specified 5 to 95%)
Accuracy, humidity . . ± 2% R.H. (at 25 °C and 5-95 % R.H.)
Measuring range, temperature . . . . . . . . . . . .- 30 °C ~ +100 °C/
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -22 °F ~ +199 °F
Accuracy, temperature . . . . . . . . . . . . . . . . . . . ± 1 °C/1.5 °F
Dew point temperature . ..- 30 °C ~ +100 °C/- 22 °F ~ +199 °F
Accuracy, dew point temperature . . . . . . . . . ± 1 °C/1.5 °F
Wet bulb temperature .. 0 °C ~ +80 °C/- 32 °F ~ +176 °F
Accuracy, wet bulb temperature . . . . . . . . . .± 1 °C/1.5 °F
Measurement rate . . . . . . 2.5 measurements per second
Response time . . . . . .10 sec. (90 % R.H./25 °C windless)
Operating conditions . . . . . . . Temperature 0 °C to +50 °C
Storage conditions . . . . . . .Temperature -10 °C to +60 °C,
. . . . . . . . .relative humidity < 80%, non-condensing
Weight (incl. battery) . . . . . . . . . . . . . . . . . . . . approx. 200 g
Dimensions (L x W x H) . . . . . . . . . . . . . 225 x 45 x 34 (mm)
G
When the unit is moved from a warm location to a cold lo-
cation (or vice versa), this relocation can lead to conden-
sation formation on the electronic measuring equip-
ment. this physical effect, which cannot be prevented
for constructional reasons, invariably leads to deviations
in measurement. the unit requires an "acclimatisation
time" of approx. 15-30 minutes, depending on how high
the temperature differences were, before the measuring
process can be continued.
Operating manual – humidity & temperature meter Bc20 B - 8