Nederman TX 3000 ESD Manual De Uso página 4

TX 3000 ESD
GB ENGLISH
Operating instructions
The machine is designed for spot suction. The
fumes are sucked into the filter via a spot nozzle
and hoses. Inside the TX 3000, the fumes are filte-
red when extracted up through the filter. When the
fumes have been filtered the air is recycled into the
working area.
In order to increase the filter's lifetime you can set
the airflow of the machine (High/Low). To further
increase the lifetime of the filter and to reduce the
energy consumption, the TX 3000 is equipped with
a timer for estimated operating time.
Air flow capacity:
The air flow is set to one of two air flow levels with
the switch "High/Low" (12).
Timer function:
On the control panel you'll find a timer (13). This is
used for starting and stopping the machine, and to
set the estimated operating time (0-12 hours). If
you want the machine to stop earlier just turn the
timer to "Off".
12 13
4