Publicidad
RECESS MOUNTING
3. Place cabinet in rough-in and make sure cabinet is plumb and level.
4. Install a #10 X 2" (SS674) screw through top mounting hole in cabinet and screw into wall stud as shown. Do not over tighten screw.
5. Once cabinet is plumb and level, install #10 X 2" (SS674) remaining screws into wall stud. Go to page 14 for final assembly.
3
5
4
#10 X
2" (51 mm)
[SS674]
Part no. 209-1289 rev. 03/10/20
Profiles Framed Cabinet
© 2020 Robern, Inc. 701 N. Wilson Ave. Bristol, PA 19007 U.S.A.
800.877.2376
www.robern.com
10
Installation instructions
Publicidad
Capítulos
