Declaration Of Conformity - Kemper MiniFil – IFA Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 38

9 Declaration of Conformity

EC declaration of conformity in accordance with annex II 1A of the EC Machinery Directive
2006/42/EC
Manufacturer:
Mr. Manfred Könning is authorized to compile the technical documentation.
We hereby declare that the following machine is compliant with all the relevant provisions of the
EC Machinery Directive 2006/42/EC.
Name:
The machine is also compliant with the relevant provisions of the following EU directives:
2006/42/EG
2004/108/EG
2006/95/EG
93/68/EWG
The following harmonized standards (or parts of these standards) were applied:
DIN EN ISO 13857
EN ISO 13850
DIN EN ISO 12100
EN 60204 -1
EMVG
EN 610000-6 part 4
EN 610000-6 part 2
The following technical specifications (or parts of these standards) were applied:
VDE 0100-510
VDE 0113-1
UVV BGV A1
DIN 45635-38
Annex VIII to Directive 2006/42/EC was observed. Compliance with the requirements of Low Voltage
Directive was ensured in accordance with Annex I, No. 1.5.1 of Directive 2006/42/EC.
Additional information:
If it is not used for as intended or the design is altered, the Declaration of Conformity expires, which
was confirmed in writing by us as manufacturers.
Vreden, 26.02.2015
KEMPER GmbH
Dipl.-Ing. M. Könning
(Head of Engineering)
KEMPER MiniFil IFA-Supplementary Operating Instructions - EN
KEMPER GmbH
Von-Siemens-Str. 20
D-48691 Vreden
MiniFil - IFA
Machinery Directive
Electromagnetic Compatibility
Low Voltage Directive
Labeling Directive
Safety of machines, safety distances for upper and lower limbs
Safety of machines
Safety of machines - Directives for risk evaluation
Electrical equipment of machines
Law on the Electromagnetic Compatibility of Devices
Generic standard for emitted interference
Generic standard for interference immunity
Establishing low-voltage plants
Electrical equipment of machines - explanations for EN 60204-1
Accident prevention regulations Principles of Prevention
Noise measuring on machines
Technical changes and errors excepted
- 19 -

Publicidad

Tabla de contenido
loading

Tabla de contenido