BALDER BSH1 Manual De Instrucciones página 8

HELMET AND MOUNTING SYSTEM ASSEMBLY
1. Fix the metal spring into the slots of the supporting frame as shown in figure 4, but on one side
only.
2. Insert the metal spring hook on the side already attached to the frame, into the provided hole
in the inner upper corner of the helmet filter opening, as shown in figure 5.
3. Insert the other metal spring hook into the second hole and attach the free end of the metal
spring into the slots on the other side of the supporting frame.
The BALDER BSH1 welding helmet is designed to be as user-friendly as possible, so
there is no need to disassemble the mounting system when replacing the protective
screens or welding filter. We strongly discourage the disassembly of the mounting sys-
tem for any none specific reason, the above described procedure requires some ad-
vanced skills.
8
Figure 4
Figure 5