Samsung BIXOLON SRP-350 Manual De Usuario página 22

FS q n [xL xH yL yH d1...dk]1...[xL xH yL yH d1...dk]n
[Name] Defined NV bit image.
[Format] ASCII FS q n
Hex 1C 71 n
Decimal 28 113 n
1 ≤n ≤255
[Range]
0 ≤xL ≤255
0 ≤xH ≤3 (when 1 ≤(xL + xH ×256) ≤1023
0 ≤yL ≤3 (when 1 ≤(xL + xH ×256) ≤288
1 ≤d ≤255
k = (xL + xH ×256) ×(yL + yH ×256) ×8
Total defined data area = 2M bits (256K bytes)
[Description] Define the NV bit image specified by n.
* n specifies the number of the defined NV bit image.
* xL, xH specifies (xL + xH ×256) ×8 dots in the horizontal direction
for the NV bit image you are defining.
* yL, yH specifies (yL + yH ×256) ×8 dots in the vertical direction
for the NV bit image you are defining.
GS ! n
[Name] Select character size.
[Format] ASCII GS ! n
Hex 1D 21 n
Decimal 29 33 n
0 ≤n ≤255
[Range]
(1 ≤vertical number of times ≤8, 1 ≤horizontal number of times ≤8)
[Description] Selects the character height using bits 0 to 2 and selects the character
width using bits 4 to 7, as follows :
Bit Off/On Hex Decimal
0-3 Character height selection. See Table 2
4-7 Character width selection. See Table 1
Table 1
Character Width Selection
Hex Decimal Width
00 0 1 (normal)
10 16 2 (double-width)
20 32 3
30 48 4
40 64 5
50 80 6
60 96 7
70 112 8
40
[xL xH yL yH d1...dk]1...[xL xH yL yH d1...dk]n
[xL xH yL yH d1...dk]1...[xL xH yL yH d1...dk]n
[xL xH yL yH d1...dk]1...[xL xH yL yH d1...dk]n
Function
Table 2
Character Height Selection
Hex Decimal Height
00 0 1 (normal)
01 1 2 (double-width)
02 2 3
03 3 4
04 4 5
05 5 6
06 6 7
07 7 8
GS $ nL nH
[Name] Set absolute vertical print position in page mode.
[Format] ASCII GS $ nL
Hex 1D 24 nL
Decimal 29 36 nL
0 ≤nL ≤255, 0 ≤nH ≤255
[Range]
[Description] * Sets the absolute vertical print starting position for
buffer character data in page mode.
* This command sets the absolute print position to
[(nL + nH ×256) ×(vertical or horizontal motion unit)] inches.
GS * x y d1...d(x ×y ×8)
[Name] Define downloaded bit image.
[Format] ASCII GS * x
Hex 1D 2A x
Decimal 29 42 x
1 ≤x ≤255, 1 ≤y ≤48
[Range]
x x y ≤1536, 0 ≤d ≤255
[Description] Defines a downloaded bit image using the dots specified by x and y.
* x indicates the number of dots in the horizontal direction.
* y indicates the number of dots in the vertical direction.
GS / m
[Name] Print downloaded bit image.
[Format] ASCII GS / m
Hex 1D 2F m
Decimal 29 47 m
0 ≤m ≤3, 48 ≤m ≤51
[Range]
[Description] Prints a downloaded bit image using the mode specified by m.
m selects a mode from the table below :
m Mode Vertical Dot Density (DIP)
0, 48 Normal 180
1, 49 Double-width 180
2, 50 Double-height 90
3, 51 Quadruple 90
GS :
[Name] Start/End macro definition.
[Format] ASCII GS :
Hex 1D 3A
Decimal 29 58
[Description] Starts or ends macro definition.
41
nH
nH
nH
y d1...d(x ×y ×8)
y d1...d(x ×y ×8)
y d1...d(x ×y ×8)
Horizontal Dot Density (DIP)
180
90
180
90