Samsung BIXOLON SRP-350 Manual De Usuario página 17

ESC FF
[Name] Print data in page mode.
[Format] ASCII ESC FF
Hex 1B 0C
Decimal 27 12
[Description] In page mode, prints all buffered data in the printing area collectively.
ESC SP n
[Name] Set right-side character spacing.
[Format] ASCII ESC SP n
Hex 1B 20 n
Decimal 27 32 n
0 ≤n ≤255
[Range]
[Description] Sets the character spacing for the right side of the character to [n
×horizontal or vertical motion units].
ESC ! n
[Name] Select print modes.
[Format] ASCII ESC ! n
Hex 1B 21 n
Decimal 27 33 n
0 ≤n ≤255
[Range]
[Description] Selects print mode(s) using n as follows.
Bit Off/On Hex Decimal Function
Character font(12 ×24) selected.
0 Off 00 0
Character font(9 ×17) selected.
On 01 1
1,2 - - - Undefined.
3 Off 00 0 Emphasized mode not selected.
On 08 8 Emphasized mode selected.
4 Off 00 0 Double-height mode not selected.
On 10 16 Double-height mode selected.
5 Off 00 0 Double-width mode not selected.
On 20 32 Double-width mode selected.
6 - - - Undefined.
7 Off 00 0 Underline mode not selected.
On 80 128 Underline mode selected.
30
ESC $ nL nH
[Name] Set absolute print position.
[Format] ASCII ESC $ nL
Hex 1B 24 nL
Decimal 27 36 nL
0 ≤n ≤255
[Range]
0 ≤n ≤255
[Description] Set the distance from the beginning of the line to the position at which
subsequent characters are to be printed.
* The distance from the beginning of the line to the print position is
[(nL + nH ×256) ×(vertical or horizontal notion unit)] inches.
ESC % n
[Name] Select / Cancel user-defined character set.
[Format] ASCII ESC % n
Hex 1B 25 n
Decimal 27 37 n
0 ≤n ≤255
[Range]
[Description] Selects or cancels the user-defined character set.
When the LSB is 0, the user-defined character set is canceled.
When the LSB is 1, the user-defined character set is selected.
ESC & y c1 c2 [x1 d1...d(y X x1)]... [xk d1... d(yx X xk)]
[Name] Define user-defined characters.
[Format] ASCII ESC & n y c1 c2[x1 d1...d(y X x1)]... [xk d1... d(yx X xk)]
Hex 1B 26 n y c1 c2[x1 d1...d(y X x1)]... [xk d1... d(yx X xk)]
Decimal 27 38 n y c1 c2[x1 d1...d(y X x1)]... [xk d1... d(yx X xk)]
y = 3, 32 ≤c1 ≤c2 ≤126
[Range]
0 ≤x ≤12 (12x24 font)
0 ≤x ≤9 (9x17 font)
0 ≤d1 ... d(y X xk) ≤255
[Description] - y specifies the number of bytes in the vertical direction.
- c1 specifies the beginning character code for the definition,
and c2 specifies the final code.
- x specifies the number of dots in the horizontal direction.
31
n
n
n