P L E A S E R E A D A N D F O L L O W A L L S A F E T Y T I P S
1. Before assembl y , CAREFUL L Y use scissors or utility knife to cut and unwrap all parts. Ma ke sure
you do not discard the hardware.
2. Make sure that you have all the parts listed. If you
www.
to include your name and address.
DO NOT MOVE MANTEL OR INSERT WHILE PLUGGED INTO POWER SUPPLY.
Attach the f ireplace insert to the completed wood
1. Dust your f
2. Y ou can clean your f
f ireplace immediately with a soft cloth or towel.
For a complete tight fit every bolt
should have a flat washer.
All panels a
re labeled Left and Right as viewed
from the front of unit.
and set out face down on the scratch free surface.
Attention: Front Panels with Stone are very heavy.
Please handle with care. Requires two people to lift
and hold in place. Hand tighten bolts only until
assembly is completed.
Insert one Wood Dowel
2.
the pre-drilled holes.
Wood Dowels are seated in the pre-drilled holes.
HAND TIGHTEN ONLY.
E-2
GETTING S T A R TED
.
f ireplace, take your time and use the hardware provided and a
r
CARE & CLEANING
entle non-abrasive household cleane r . Make sure to dry your
into each of
W
CAUTION:
HELPFU L HINTS
lts.
C
T AL L
L
Center Front
Panel
D
N
N
M
C
L
Center
Right
Side
Panel
h
N
B
Center
Left
Side
Panel