Manual Operation - Panasonic WEDEATSU EP1061 Instrucciones De Uso

MANUAL OPERATION

MANUAL OPERATION FOR THE UPPER BODY
1. Press
1
neck roller position reclining
2. Open the Cover of the Controller
programmed / manual
operation operation
manual operation
shiatsu swedish knead
vibration tap A tap B 3. Selecting the Massage Type Required
3
whole back regional
roll
intensity position
4
Combining Massages
• It is possible to combine massage types.
• It is not possible to combine massage types in the same category.
E.g.1 Adding Tap B when Knead is selected.
manual operation manual operation
shiatsu swedish knead shiatsu swedish
vibration tap A tap B vibration tap A
Press
whole back regional whole back
roll roll
E.g.3 Toggling off Roll pressing it again.
manual operation manual operation
shiatsu swedish knead shiatsu swedish
vibration tap A tap B vibration tap A
whole back regional whole back
roll roll
Press
Changing Massage Types
E.g.1 Changing massage types in the same category.
(Changing to Shiatsu when Knead is selected.)
manual operation manual operation
shiatsu swedish knead shiatsu swedish
Press
vibration tap A tap B vibration tap A
whole back regional whole back
roll roll
16
button
• The ON/OFF lamp will come on.
• You can now select either Strong or Gentle or one of the manual
settings that can be accessed by opening the cover of the
controller.
• All of the manual operation buttons will start
to flash.
• Press the button of the massage you require.
The button will be lit.
• The seat will automatically recline to the massage position.
E.g. Selecting Knead.
manual operation manual operation
shiatsu swedish knead shiatsu swedish knead
Press
vibration tap A tap B vibration tap A tap B
whole back regional whole back regional
roll roll
E.g.2 Adding Roll to the selection.
manual operation
knead shiatsu swedish knead
tap B vibration tap A tap B
regional whole back regional
roll
Press
knead
tap B
regional
knead
tap B
regional
E.g.2 Changing to a massage type outside the category.
(Changing to Tap B when Knead is selected.)
• When Knead is combined with Tap B, deselecting Knead will leave only Tap.
manual operation
shiatsu swedish
vibration tap A
whole back
roll
4. Adjusting Manual Massage Settings
neck roller position reclining
Adjusting the Vertical Position of the Massage Heads
programmed manual
/
operation operation
• The massage heads will move a little each time the button is
manual operation
shiatsu swedish knead
pressed. If you hold down the button, the massage heads will
vibration tap A tap B
continue to move until you release the button. When the
whole back regional
roll massage heads reach their limit you will hear a "peep, peep,
intensity position
peep" sound.
slow fast
leg massage
Adjusting the Width between Massage Heads
• Vibration, Tap, Shiatsu Whole Back Roll, and Regional Roll
can be adjusted in 5-stages while Swedish (gentle) can be
adjusted in 3-stages.
• As Swedish covers the entire width of the back, it is not
possible to adjust width settings.
• The massage heads will move a little each time the button is
pressed. If you hold down the button, the massage heads will
continue to move until you release the button.
• When the massage heads reach their limit you will hear a
"peep, peep, peep" sound.
Adjusting Massage Intensity
• Massage intensity can be adjusted up to 3 levels.
• When the massage heads reach their limit you will hear a "peep,
peep, peep" sound.
• As Roll or combining Roll with other massages sometimes
produce an especially strong massage, adjustment is limited
to medium or weak.
manual operation
shiatsu swedish knead
Roll, Roll + (Shiatsu, Tap B, Tap A, Vibration) Combination..................................Weak/Medium only
Roll + (Knead, Swedish Combination) ...................................................................Weak only
vibration tap A tap B
• For Tap B, Swedish, and Vibration, unless the massage heads are actually touching the body then you may
whole back regional
not feel the movement.
roll
5. Auto Stop in Manual Operation
• A timer will automatically stop the unit approximately 15 minutes (15–17 minutes) after the massage started.
(This is to prevent overuse in the interests of safety.)
• The massage heads will move to the retracted position and stop.
• The ON/OFF lamp will flash until the heads have stopped moving.
• If you want to start another massage, please press
• Please rest at least 10 minutes between massages.
6. Stopping Manual Operation
Press button to stop manual operation.
• The ON/OFF lamp will continue to flash until the massage heads have returned to the retracted position.
manual operation
knead shiatsu swedish knead shiatsu
Press
tap B vibration tap A tap B vibration
Press
regional whole back regional whole back
roll
button.
manual operation
swedish knead
tap A tap B
regional
roll
Raising the massage heads Lowering the massage heads
position position
Press
Press
Increasing the width Decreasing the width
position position
Press
Press
Increasing massage intensity Decreasing massage intensity
intensity intensity
Press
Press
17