RealFlame G1200 Manual De Instrucciones página 5

Step Three
-Set base panel (1) on a at surface as shown.
-Join panel (2), (3), (6), (7) by inserting eight bolts in the holes of the four panels. Using eight
excenter ttings lock the bolts.
Step Four
-Attach upper rebox trim (8) to left & right
washers. Tighten all the screws with the allen wren ch provided.
-Attach left center panel (9) to left outside panel by securing 1
Tighten the screw with the allen wrench provided.
-Repeat with right center panel (10).

panel by securing 2
front
long
D
C
5
screws through 2
long allen
screw through 1 washer.
allen