English; General Safety Instructions - AEG MRC 4117 Instrucciones De Servicio

Radio con reloj
Ocultar thumbs Ver también para MRC 4117:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 38

English

68

General Safety Instructions

Read the operating instructions carefully before putting the appliance into opera-
tion and keep the instructions including the warranty, the receipt and, if possible,
the box with the internal packing. If you give this device to other people, please
also pass on the operating instructions.
• To avoid the risk of fire or an electric shock, you should not expose the device
to rain or moisture. Consequently, do not use the device in the immediate vicin-
ity of water - for example near a bath tub, a swimming pool or in a damp cellar.
• Use the appliance only for the intended, private use. This appliance is not
intended for commercial use.
• The power adaptor is only intended for use in dry environment.
• Ensure that the output voltage, currency and polarity of the power adaptor
correspond to the nameplate specifications!
• Do not touch the power adaptor with wet hands!
• Unplug the power adaptor from the appliance when cleaning or if a fault oc-
curs.
• Make sure that the adaptor cable is not bent, crushed, run over or does not
come into contact with heat sources.
• Only connect the device at a properly installed plug socket. Pay attention that
the specified voltage corresponds to the voltage of the plug socket.
• When using external mains supply, pay attention to the correct polarity and
voltage. Always place the batteries in the correct direction.
• Assemble the device in such a way that the available ventilation openings are
not covered.
• Never open the housing of the device. Incorrect repairs can constitute a
considerable risk for the user. Should the device become damaged, in particular
the mains supply cable, do not operate the device any longer, but rather have it
repaired by an expert. Check the mains supply cable regularly for damage.
• For safety reasons a broken or damaged mains lead may only be replaced by an
equivalent lead from the manufacturer, our customer service department or a
similary qualified person.
• If the device is not used for a longer period, remove the plug connector from
the plug socket or take out the batteries.

Publicidad

Tabla de contenido
loading

Tabla de contenido