DURAVIT 610001 Manual De Instrucciones página 51

Problem
The water spray
intensity is too weak.
The temperature of
the shower water is
not warm enough.
The water spray
from the spray wand
suddenly stops.
51
Potential cause
The water spray intensity
has been set to "Low".
The water supply hose has
buckled.
The water temperature has
been set to "Off" or "Low".
The function automatically
stops after 5 minutes.
The seat sensor is losing
contact with the user more
frequently.
Solution
> Select the "Water spray
intensity" option on the
remote control
the water spray intensity.
> Contact your installer to have
this checked.
> Adjust the water temperature
at the remote control (see
chapter 6).
This is normal.
> Sit down again and press the
Rearwash/Ladywash button
once again.
11
to adjust