Standard Accessories - HIKOKI CR 36DA Instrucciones De Manejo

Direct current
Weight
kg (According to EPTA-Procedure 01/2014)
Switching ON
Switching OFF
Disconnect the battery
Lock
Unlock
Remaining battery indicator switch
Mode selector switch
Mode indicator lamp
Low speed mode
Lm
Medium speed mode
Mm
High speed mode
Hm
Max. speed mode
Maxm
Straight mode
Orbital mode
Warning
Prohibited action
Battery
Lights ;
The battery remaining power is over 75%
Lights ;
The battery remaining power is 50% – 75%.
Lights ;
The battery remaining power is 25% – 50%.
Lights ;
The battery remaining power is less than 25%
Blinks ;
The battery remaining power is nearly empty.
Recharge the battery soonest possible.
Blinks ;
Output suspended due to high temperature.
Remove the battery from the tool and allow it to
fully cool down.
Blinks ;
Output suspended due to failure or malfunction.
The problem may be the battery so please
contact your dealer.

STANDARD ACCESSORIES

In addition to the main unit (1 unit), the package contains the
accessories listed on page 274.
Standard accessories are subject to change without notice.
APPLICATIONS
○ Cutting metal and stainless steel pipe.
○ Cutting various lumber.
○ Cutting mild steel, aluminum and copper plate.
○ Cutting synthetic resins, such as phenol resin and vinyl
chloride.
SPECIFICATIONS
1. Power tool
Model
Voltage
No-Load Speed
Stroke
Mild Steel Pipe
Vinyl Choride Pipe
Capacity
Wood
Mild Steel Plate
Battery available for this tool*
Weight**
* Existing batteries
series, etc.) cannot be used with this tool.
** According to EPTA-Procedure 01/2014
NOTE
Due to HiKOKI's continuing program of research and
development, the specifi cations herein are subject to
change without prior notice.
2. Battery
Model
Voltage
Battery capacity
Available cordless
products**
Available charger
* The tool itself will automatically switch over.
** Please see our general catalogue for details.
11
English
CR36DA
36 V
0 – 3000 min
32 mm
O.D. 130 mm
O.D. 130 mm
300 mm
19 mm
Multi volt battery
4.5 kg (BSL36A18)
4.8 kg (BSL36B18)
(BSL3660/3620/3626,
BSL36A18 BSL36B18
36 V / 18 V (Automatic Switching*)
2.5 Ah / 5.0 Ah 4.0 Ah / 8.0 Ah
(Automatic Switching*)
Multi volt series, 18 V product
Sliding charger for lithium ion
batteries
–1
BSL18xx