4. Press the Memory button (15) to save & confirm. The unit goes to
the next memorized number you wish to store. Repeat the steps to
save other track numbers.
5. The unit can store maximum 30 CD memories and 99 CD/MP3,
USB memories. After it has stored to the maximum of memories,
no further entry is possible.
6. If you press the
unit clears the memorized content and returns to STOP mode.
7. If you press the
memorized, "Memory" is displayed and the unit starts playing the
memorized tracks.
8. If you press the SKIP
tracks, the unit skips to the previous or next memorized track.
9. If you press the
the unit stops playing but memorized track selection is kept. Press
the
return to STOP mode.
Remark: Please note that the unit can only read FAT32 format USB
drives with less than 32GB.
RECORDING AND STORING FROM
TURNTABLE TO USB
User can record favourite vinyl songs in MP3 format and store them on
a memory device via the USB port (8)
- On Main Unit (Amplifier), set the Function
mode by remote control.
GPO PR200_user_Manual EU - Oct 2017.indd 21
STOP button while programming the unit, the
PLAY/PAUSE button when the unit has been
STOP button when playing memorized tracks,
STOP button again to clear the memorized content and
or
buttons when playing memorized
button (4) to PHONO
21
26/10/2017 10:07