Philips AVENT SCF293/00 Instrucciones De Servicio página 6

Ocultar thumbs Ver también para AVENT SCF293/00:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

6
English
Getting to know the settings
Note: Before you sterilize bottles and other items, clean them first.
Only place items in the sterilizer which are suitable for sterilizing. Do not sterilize items
that are filled with liquid, e.g. a teether with cooling fluid.
Sterilize
/
Auto (SCF293 only)
Dry (SCF293 only)
• Sterilize mode is for sterilizing baby items.
• A sterilizing cycle takes approximately 10 minutes.
• Heating up takes approximately 4 minutes and
sterilizing takes approximately 6 minutes.
• Make sure to pour exactly 130 ml/4.5 oz distilled
water directly into the water reservoir of the base .
• Auto mode is for sterilizing and drying baby items in
one go.
• An auto cycle takes approximately 40 minutes.
• When you use the "Auto" mode, the appliance
starts sterilizing first and then drying will
start automatically. The sterilizing cycle takes
approximately 10 minutes, and the drying cycle
takes approximately 30 minutes.
• Make sure to pour exactly 130 ml/4.5 oz distilled
water directly into the water reservoir of the base .
• Dry mode is for drying baby items.
• A drying cycle takes approximately 30 minutes.
• When you dry baby items, do not add water to the
water reservoir of the base.

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Avent scf291/00

Tabla de contenido