Bimar DA19 Manual De Instrucciones página 12

• If the appliance is not being used, unplug it from the mains and empty the
water tray.
• Do not leave the appliance exposed to atmospheric conditions (sun, rain,
etc..).
• Do not pull the power cable or the appliance itself to unplug the appliance
from the mains.
• In order to protect yourself from electric shocks, do not immerse the plug,
the adaptor, the power cable or the appliance in water or any other liquid.
• If the power cable is damaged, it must be replaced by the manufacturer or its
technical assistance centre or by someone who is similarly qualified, in order
to prevent any risks.
Warning: in order to avoid overheating, do not cover the device.
INSTALLATION
• After unpacking, check the integrity of the appliance; if in doubt, do not use and contact a
qualified technician. The packaging materials (plastic bags, polystyrene, metal staples, etc.)
must not be left within reach of children, as they constitute possible sources of danger and
must be disposed of according to applicable regulations.
• Before connecting the appliance, verify that the voltage values on the adaptor's plate match
with those of the electric system. Should the socket and the adaptor's plug be incompatible,
have the former replaced with a correct one by a professional operator. The use of adaptors
or extensions is generally not advisable; if it is necessary to use them, they must comply with
safety regulations and the total current (amps) must not be rated lower than the maximum
current of the appliance.
• Before each use, ensure that the appliance is in good order, that the power cable is not
damaged: if you have any doubts, consult a qualified professional.
• Ensure that the power cable is correctly positioned and does not come into contact with hot
parts or sharp edges, or become wound around the device itself and is not twisted.
• The plug point must be easily accessible so as to easily remove the plug in case of an
emergency.
• The appliance must not be placed directly beneath a plug point.
• Place the appliance far from any heat sources (stoves, heaters), carpeting, parquet flooring,
curtains, tapestries, electrical appliances (such as computers, precision tools, etc.) or delicate
furniture that could get damaged by water or the vapour. The surface on which it is placed
must be water-resistant, the free space around the appliance must be at least 50 cm, because
the vapour can settle on objects that can be damaged. Make sure the vapour is not pointed to
the wall, as this could cause damage.
• Make sure the cable is positioned correctly and that it is not wound around the appliance or
tangled and that it cannot get caught, to prevent the appliance from falling. Make sure there's
12