General Use; Cleaning And Storage; Technical Specifications - AEG LW 5583 Instrucciones De Servicio

English
22
• Heat the rollers with the appliance closed for ca. 12 min;
do not use immediately.
• Open the cover and switch off the appliance (O).
• Pull out the mains plug.
• Allow the rollers to cool.
• Ensure there is adequate ventilation!
Commissioning
• Fully unwind the mains cable.
• Check that the roller is fitted correctly. The different sizes
of the rollers have been marked on the base plate to help
you. This helps when putting away the rollers.
• Insert the plug in a duly installed 230V/50Hz socket.
• Switch the appliance on (I) or off (O) using the switch. If
the red LED is lit, the appliance is ready for operation.
The heating phase has begun.
• Close the cover.
• After around 12 min, the green LED lights up. The heat-
ing phase is complete. The rollers are hot and ready for
use.
NOTE:
The temperature is controlled by a thermostat. The heat
switches back on automatically.

General Use

CAUTION:
Only use the rollers on dry hair.
• Select the roller size depending on the length and style
of hair you want to have. For tight curls use small rollers;
for wavy hair use large rollers.
• To secure the roller there is a metal clip matching the size
of the roller. The sizes are colour-coded.
• To retain the heat in the appliance, only open the cover
briefly to remove the roller.
• Take a part of the hair, comb it and wind it around the
roller. The lock of hair should not be wider than the roller.
• Secure your hair to the roller using a clip.
• Repeat the process with the other rollers.
• Switch the appliance off if you no longer need it. Pull out
the mains plug.
• Leave the rollers in your hair, until they have fully cooled
(around half an hour).
• Then remove the clips and unwind the rollers again.
• Remove any hair that has stuck to the roller, so that it
does not burn when the roller is next heated.
• Finally style the hair with your fingers. Do not use brushes!
• Hold in place with spray or hair wax..
NOTE:
For better hold you can wash your hair before putting in
the rollers, apply mousse and blow dry.
CAUTION:
Do not apply styling products to the rollers!

Cleaning and Storage

WARNING:
►
Before cleaning remove the mains lead from the
socket.
►
Wait until the appliance has fully cooled!
►
Under no circumstances should you immerse the
device in water for cleaning purposes. Otherwise this
might result in an electric shock or fire.
CAUTION:
►
Do not use a wire brush or any abrasive items.
►
Do not use any acidic or abrasive detergents.
• You can wipe the rollers with a lightly damped cloth.
• Clean the casing with a soft, dry cloth – without any addi-
tional cleaning agents. If required you can lightly dampen
the cloth.
• Keep the inside of the appliance free of hair, dust or any
foreign objects.
• Make sure there are no metal clips on the base plate. Use
the accessory compartments to store the clips.
• Plug the rollers onto the rods. The different sizes of the
rollers have been marked on the base plate to help you.
This helps when putting away the rollers.

Technical Specifications

Model: .................................................................................. LW 5583
Power supply: ................................................................ 230 V, 50 Hz
Power consumption:.............................................................. 400 W
Protection class: ................................................................................I
Net weight: ............................................................................1.75 kg
Subject to technical changes without prior notice!
This device has been tested according to all relevant current
CE guidelines, such as electromagnetic compatibility and low
voltage directives, and has been constructed in accordance
with the latest safety regulations.