Leckey KIT Seating System Instrucciones De Usuario página 12

7.5 Sacral support
Fit the sacral cushion over the hardware and
fasten at the back with the poppers. The
standard sacral support should be attached
with the double flaps (A) at the top.
To attach the sacral support, slide the
support onto the lowest mounting bracket on
the backrest spine. Secure it with a bolt (B)
on either side. Cover the bracket with a spine
upholstery shroud (C).
C
A
B
7.6 Hip Laterals
To attach the hip laterals to the standard
sacral support, loosen the screw (A) and
insert the bar of the hip lateral into the hole
on the side of the sacral support. Tighten the
screw to secure.
To attach the hip lateral covers, slide the
cover over the lateral support.
A