Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
SAFETY PRECAUTIONS
•
Before plugging in the appliance, check that the electrical rating shown on the rating plate corresponds with your household
electricity supply.
•
Never immerse the unit base of the appliance in water or other fluid, nor rinse it under the tap, to avoid risk of short-circuit or
electric shock. If there is water inside the unit base, please contact Authorized Service Agent.
•
Never put the power cord or plug into water for cleaning. Do not wipe the plug prongs with damp cloth, nor plug in with wet
hands.
•
Plug the appliance to the wall outlet properly & securely. Loose plug may lead to overheat or electric shock.
•
If the power cord is damaged, it must be replaced by the manufacturer or its service agents or similary qualified electricians
in order to avoid a hazard.
•
Never let the appliance unattended.
•
Keep hands and utensils out of the container while the motor is running to prevent the possibility of severe personal injury
and/or damage.
•
Do not run the appliance without loading in the blender jar..
•
To prevent spillage, do not put liquid in the blender jar exceeding the MAX line.
•
Do not expose the appliance to source of heat such as a radiator or sun shining through a window. For good ventilation, do
not place cloth underneath the appliance.
•
Indoor use only. Do not use outdoor or for commerical purpose.
•
Always operate with the lid in place. When processing hot beverages, properly secure the lid and measuring cup in place to
avoid scalding due to spraying of hot liquids.
•
This appliance is not intended for use by persons (including children) with reduced physical sensory or mental capabilities,
or lack of experience and knowledge, unless they have given supervision or instruction concerning use of the appliance by
a person responsible for their safety.
•
Children should be supervised to ensure that they do not play with the appliance.
•
Switch off the appliance and disconnect from supply before changing accessories or approaching parts that move in use.
•
Care is needed when handling cutting blades, especially when removing the blade from the bowl, emptying the bowl and
during cleaning.
•
Unplug the power cord from the wall outlet when appliance is not in use, before putting on or taking off parts, and before
cleaning.
•
If the motor has overheated, the temperature monitoring system will trigger and the motor will stop. Switch off and unplug the
appliance and let the motor cool down. The motor temperature monitoring system resets after the blender is unplugged from
wall socket for 45 minutes. In this time, plug in the blender and it can be used again.
•
The blade is very sharp, use caution when handling the blade. Do not attempt to disassemble the blade assembly and touch
any rotating parts.
•
Any servicing should be performed by an authorized service representative. Do not attempt to disassemble, repair or modify
the appliance.
2
Publicidad
Capítulos
Tabla de contenido
