After Use/Storage - Maytag MLI7000AAW Manual Del Usuario

AFTER USE / STORAGE
1. Press the steam button, so that it
returns to the "Dry" position.
2. Turn the temperature control dial to
"OFF".
Setting indicator
3. Remove the tank and drain
any remaining water After
draining the water, reinstall
the tank onto the iron.
4. Remove the electrical plug
from the electrical outlet.
• Grasp the electrical cord
by the plug when
unplugging it.
9
5. Retract the electrical cord.
• To retract the electrical cord, pull it out
slightly, then release it.
• If the cord stops before retracting
completely, pull out the cord slightly,
straighten out any twisted parts, then
slowly release it again.
6. Place the case back over the iron.
• Be sure that both case latches are
closed securely prior to storage.
• Please be aware that the case will
only fit correctly in one direction. If the
case is placed sideways over the iron,
it may become deformed due to the
iron's heat.
Keep hold of the
electrical plug.