Filters
Buttons
Maintenance
Lights
The hood has removable aluminum filters that must be cleaned when they collect
grease. The filters can be cleaned with soap and water or in the dishwasher.
When used over a wok or other high grease application, more frequent cleaning
may be required.
Remove the filters for cleaning: push the handle in and pull down. The front will
come out first. Then pull the back down and out. See Figure 2.
Figure 2: Filters
To replace the filters: insert the back ends first, then while holding the handles,
push in and up until the filters are secured in place.
Wipe with sudsy water or household cleaners such as Fantastic(r) or Formula
409(r), rinse well and dry with a clean soft cloth to avoid water marks.
Use a 40W, 120V E12bulb (chandelier style).
NOTE: Turn off the lights and fan and allow lights to cool before handling. If lights do
not operate upon installation, check for proper insertion. Light bulbs can be cleaned
with soap and water.
CAUTION: TURN POWER OFF AT BREAKER BEFORE REMOVING
A DAMAGED BULB. DO NOT TOUCH THE BULBS IMMEDIATELY
AFTER USE. THE BULBS WILL REMAIN HOT FOR SEVERAL MIN-
UTES.
English 3