Operation - Before First Use - Bestron ACV2001 Manual Del Usuario

instruction manual
oPerAtion
- General
The appliance is intended only for domestic use, not for professional use.
1. a. Button 1250Watt with indicator light
b Button 750Watt with indicator light
c. Turbo button
2. Thermostat dial
3. Handle

oPerAtion - before first use

Remove the device from the packaging and remove all the packaging materials.
• In order to avoid overheating, do not cover the device.
• The device must not be located immediately below a socket-outlet.
• Do not use this device in the immediate surroundings of a bath, shower or swimming pool.
uSe -
Assembly of the foot support
The two support feet must be fitted by using the
screws, before you use the convector heater.
Please see figure 2.
uSe -
location
Place the convector heater on a stable surface in the room to be heated. The heater heats the air flowing
past the appliance. For this reason, the best place for the convector heater is 20 to 25 cm in front of a
window. An air flow is generated by the cooling of air passing the window and the heating of air passing the
convector heater.
Make sure that air can pass through the heater easily. For this reason the top and bottom of the convector
heater must always remain unobstructed. Never hang clothing, etc., over the convector heater to dry.
The heat produced by the heater could readily result in a fire.
6
3
1
2
5
8
7
19
4
4. (Hot) air outlet
5. Body
6. Warm air fan outlet
7. Foot support
8. Plug