Operation - General; Operation - Before First Use; Operation - Use - Bestron AHH1200 Manual Del Usuario

operAtion - general

The appliance is intended only for domestic use, not
for professional use.
1. Swing function button
2. Button heater below
3. Button heater above
4. On / off switch
5. Handle
6. Heating elements
7. Foot

operAtion - before first use

Remove the halogen heater from the packaging and remove all the packaging materials.
montAge - Assembling the foot
1. Make sure that the heater's power cord runs
through the opening, with the plug at the bottom
side of the foot (See figure 2).
2. Use the two screws to mount the foot to the
bottom of the heater (See figure 2).
3. Place the power cord in the notch under the
foot.

operAtion - use

1. Place the halogen heater on a stable surface and ensure that the grilles for the supply and removal of
the air are unobstructed.
The anti-tipping safety device is located under the heater's foot. If the foot of the heater is not placed on
the surface correctly, then the safety device will turn off the heater.
2. Insert the plug into the plug socket.
3. Select one or more of the following functions:
1. 2.
15
instruction manual
3. 4.
5.
6.
7.