Program Playback - Aiwa FR-TC5000U Instrucciones De Manejo

2
4
a
b
c
5
32
CD OPERATIONS

Program playback

Up to 30 tracks can be programmed and played from all the
loaded discs.
1 Load the disc(s), referring to "Loading the disc(s)" on page
24.
2 Press SET.
MEMORY starts flashing.
3 Press CD DIRECT PLAY (CD1l, CD2l or CD3l) to select
a disc.
Go to the next step when the trays stop rotating.
4 Press r or t to select the desired track.
a track number
b program number
c disc number
5 While the selected track number is flashing, press SET.
6 Repeat steps 3, 4 and 5 to program more tracks.
7 Press e to start program playback.
The unit retains the program even when the function is changed
or the power is turned off.The program is cleared when the disc
compartment is opened, or when the sSTOP button is pressed
while program play is stopped.
To check the program
Press SET repeatedly during programming or before starting
program play.
English