Descargar Imprimir esta página

S&P SPLIT 2000 PTC Instrucciones De Uso página 16

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Before using the remote control, remove the plastic battery cover Fig. 4 –
A.
To change the remote control battery follow the instructions shown in Fig.
4 – B. Replace the battery with one of the same type CR2025 3V.
5.
Operating warnings
The SPLIT-2000 PTC model is designed to operate under the following
ambient temperature conditions: -25°C / +40°C.
exceeded, the device will cease to function as a self-protection measure,
and the operating information display will show the following information:
To reactivate normal operation, disconnect the device from the mains
and reconnect it.
If the information display shows the errors: E1 or E2, contact the S&P
After Sales Service or your distributor.
6.
Maintenance
Before carrying out any maintenance work, make sure that the device
has been disconnected from the mains and let the heater cool down
for a few minutes.
Periodically, clean the appliance with a dry cloth to remove the dust.
Do not use detergents or abrasive products.
Take down the device from the wall and, using a vacuum cleaner,
clean the dust from the intake grill and the air output openings.
Do not immerse the device or spray with water.
If the appliance is not to be used for any length of time, we
recommend returning it to its original package and storing it in a dry,
dust-free place.
E3: Ambient temperature under to -25ºC
E4: Ambient temperature high to +40ºC
16
If these limits are

Publicidad

loading