External Display - Premier MC-5363 Manual De Instrucciones

A. LCD display
B. "+"button
C. "-"button
D. "BATCH" button
E. "RESTART" button
F. "ADD" button
G. "UV" button
H. "MG" button
2.3 CONTROLLING PANEL
[ + ] : increase number
[ - ] : decrease number
[BATCH] :Pressing this key toggles the preset batch amouts of 10, 20, 50,100 .(Selection
will be displayed on the " + " button or " - " button ).
[RESTART]:Used to start counting operation in the following cases.
a. to resume counting after an error is cleared.
b. To clear the displayed counted number.
c. Press to start counting.
[ADD] : When this function is selected each counted Hopper will be added together; when
unselected each counted Hopper will count from Zero.
[UV] :Press this key to select or deslect UV function.
[MG] :Press this key to select or deslect MG function.

2.4 EXTERNAL DISPLAY

The external display show the same number as in the controlling panel LED. The external
display is showed to the customer.
P-4