Premier MC-5363 Manual De Instrucciones página 25

3.4 the way to adjust the up / down screw
When improper feeding of bills occur,, adjust the bill thickness in the hopper by turning the bill
adjustment wheel located on the back of the machine to ensure proper feeding.
--- Turn it right decrease the thickness ( see figure 4)
--- Turn it left increase the thickness ( see figure 5)
---Hand-hold a note, put in inside the counting roller and resistant rubber ( see the picture) , to test the
tensile force. Clockwise direction is tighten, counter-clockwise direction is loosing.
---Do not operate the unit in areas with high temperature or high humidity since it may cause the
machine to malfunction.
--- When not using the unit for a long time, remove the power plug from the wall outlet.
Never operate the unit under strong light.
--- Clean the machine frequently (after switching it off and unplugging it )
--- Do not use this product in areas where it may be exposed to water or other liquids.
--- Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol
cleaners . Use a damp cloth for cleaning.
1) machine body
2) Operation manual
3) brush
4) fuse
5) Plug
6) Screwdriver
P-8
MAINTENANCE NOTICE
Packing List
1pc
1pc
1pc
1pc
1pc
1pc