Voltage Measurements - Meterman AC50 Manual De Uso

If the display is not visible during measurement, press the "HOLD" button (3)
to retain the display. The clamp can then be removed from the conductor and
the stored value read.

Voltage Measurements

Do not connect more than 600 V AC / DC to the input sockets. Exceeding these
values can endanger the operator, and may result in damage to the instrument.
Before switching to a new function, disconnect the probes from the UUT.
Only handle test leads and probes on the grips provided. Avoid touching the
probes under any circumstances.
1) Turn selector switch (2) to 400V
2) Plug the black test lead into the "COM" socket and the red lead into the "VΩ"
socket
3) Connect the probes to the UUT and read the display
If the display is not visible during measurement, press the "HOLD" button (3)
to retain the display. The probes can then be removed from the conductor and
the stored value read.
7