Device Information - amig Remock Lockey Magic Serie Manual De Usuario

If you touch the menu button in the upper right corner when the application is connected to the motorized cylinder as the master controller, you will arrive
at the configuration menu of the connected motorized cylinder. You can change the configuration of your motorized cylinder and perform administrative
activities through this menu.
Before using your intelligent cylinder, the settings for "direction of closing rotation" and "number of turns" must be adjusted correctly.
Otherwise, it will damage the mechanical structure of the device.
The related menu has 4 tabs: Device Info, Knob Settings, Users, Reports.

DEVICE INFORMATION

In this tab, you can see the following information: Device name, Favorite Device, Device Type , Device Firmware Version , Battery Level , Number of Enrolled
Controllers , Number of Operations (Locking or unlocking).
The "Favorite Device" option allows you to set the device as default when there is more than one device registered in the app. Only one device can be set as a favorite.
If you want to remove the connected device from your mobile application, touch the "Delete device" button in this menu.
KNOB SETTINGS
In this tab there are the following menu items:
• Buzzer of knob: You can activate / deactivate the activation sounds that the cylinder emits.
• Delayed locking: If this function is activated, when it is going to leave, and if you touch the control button defined as closing button of the motorized cylinder, the
cylinder will close automatically after 10 seconds.
• Auto lock: If this function is activated, your device will close automatically after 1 minute after opening.
• Auto disconnection time: You can adjust (in steps of 5 seconds) the period of time that the application remains connected to the motorized cylinder once it is
connected.
• Invert locking way: You may have to change the direction of closure according to the way in which the door is located in which you will use your motorized cylinder.
• Adjust number of turns: Before using your motorized cylinder, you may need to adjust the number of laps of your motorized cylinder. To do this, close the door and
then press the "Rotating blue arrow" button. The motorized cylinder will close and then open to set the number of turns.
• Latch retraction period: It is possible that you have to adjust the period of time during which the motorized cylinder keeps the latch inside when it opens. You can do
it between 1 and 9 seconds.
USERS
• Controllers: You can see the registered controllers of the motorized cylinder. If you touch any user, you can reach the dedicated page to edit the name or remove the
controller.
• Enroll new controller: In this tab, you can add, edit or delete (except the master controller), to other controllers or users that operate with mobile phone, remote
control of other Remock Lockey devices or other accessories of the manufacturer.Your motorized cylinder can be paired with up to 40 controllers. To add a new
controller, touch the green "+" button. After touching the button you will hear a long warning tone. After that tone, you must send the open or close signal through the
new controller as explained below in order for this new controller to be paired:
• Remote control: press any of the two buttons (open or close). The control will be paired and you can control the cylinder simultaneously with some Invisible
Lock.
• Remock Lockey Net: keep the RL Net app open in the background and after pressing the "+" button on the RL Magic app, access the RL Net app and press
either button (lock or unlock). The device will be paired and you can control the cylinder from any location.
• Additional mobile phone: the RL Magic app has to be downloaded and installed. You will have to choose the language and define a user account.
Subsequently, on the mobile phone defined as master controller, go to the "Users" tab and touch the green "+" button that appears after clicking on "Enroll new
controller". The motorized cylinder will emit a long warning tone (5 seconds) and then a short tone. Now, again on the new mobile phone to pair, tap "+" in the
upper left corner to see the list of available motorized cylinders. Tap the line of the cylinder to be paired and define a name for the device. After touching the
green mark, if the match is successful, you will hear two cylinder tones and the additional mobile phone will be a new controller.
• Create a One-Time Password (OTP): allows the guest to open the device once without the need for a previous pairing. This code can be configured to be used at
any time (unlimited), or for a time by entering a start and end day.
• Delete all remote controllers: If you want to delete all motorized cylinder controllers, touch "Delete all remote controllers". The master controller can not be deleted
using this menu item.
REPORT
In this tab you can see which user locked or unlocked the device with date and time information.
Configuration of the Motorized Cylinder
26
Administration Menu